Data, history and news
From a molecule economy to an electron economy
Electron Economies follows the move from burning fuels to moving electrons. It collects news on electrochemical ways to make energy, store it and make materials. It also looks at the processes that cheap oil and gas pushed aside, and asks one question: can the value now beat the cost?
Graphic
Where the world's energy goes
Most primary energy is burned. Most of the energy that is burned becomes waste heat. Electricity from wind, solar and hydro starts as electrons and skips the heat engine.
World energy flows, 2025, exajoules (EJ)
Method: primary energy totals and shares are from the Energy Institute Statistical Review of World Energy 2026, which counts nuclear and renewables by energy content. The split between uses and the conversion losses are the editor's estimates, from typical power plant and end-use efficiencies. Values are rounded and approximate.
is burned directly for transport, heat and industry. About two thirds of it ends as waste heat.
of electricity reaches the grid. Wind, solar and hydro supply it with almost no conversion loss at the source.
is lost as heat each year. The electron economy is first an efficiency story.
Cost curves
When does electrolytic hydrogen beat gas?
Hydrogen sets the cost floor for ammonia, methanol and green steel. Its cost depends on two things: the price of power and the price of the electrolyser.
About USD 23/MWh
is the power price at which hydrogen from a China-built electrolyser matches hydrogen from natural gas at USD 10/MMBtu.
With European-built electrolysers, the capital cost alone is USD 3.6 to 6 per kg before any power is bought. They match gas only with almost free power and gas above about USD 15/MMBtu.
A low load factor costs as much as expensive power. Solar-only plants run about 30% of the time.
- Electrolyser costs: IEA Global Hydrogen Review 2025 (China-built USD 600 to 1,200/kW; others USD 2,000 to 2,600/kW).
- Gas route: US DOE H2A, 2012 dollars, no carbon price.
- Editor's model: 52.5 kWh/kg, 8% discount rate, 20 years, O&M 3% a year.
Latest
News from the electron economy
Recent news on electrochemical production, storage and materials. The newest item is first.
Why now
The cost curves have moved
Electrochemistry is often an elegant way to do things. The reactions are selective. They can run at ambient temperature and pressure. The voltage sets the driving force. And the process uses electrons directly. It does not burn fuel to make heat to drive the chemistry.
But electrochemistry has not always been the economical way. For a century, fossil fuels gave industry cheap carbon and cheap heat. As a result, most electrochemical routes could not compete on cost.
Now renewable electricity is cheap and getting cheaper. Electrodes and membranes are much better than they were. The battery and fuel cell industries have built a large manufacturing base for electrochemical hardware, and this base continues to grow.
In the 1970s the technology was not ready. It may be now.Denis Cumming, editor
History
Processes that never had an alternative
Some electrochemical processes survived the age of cheap oil. They survived because no other process could do the job better.
Chlor-alkali electrolysis
Almost all of the world's chlorine and caustic soda.
Hall-Héroult
The only industrial route to aluminium.
Electrowinning
The high-purity copper in every wire and the zinc on every galvanised beam.
Electrochemical fluorine
Every PTFE seal, membrane and non-stick surface.
Adiponitrile
By electrohydrodimerisation, for nylon-6,6. Monsanto commercialised it. It is still in production.
| Process | Product and use | What happened | Cause |
|---|---|---|---|
| Nitrobenzene to aniline | Aniline, a precursor for polyurethanes and dyes. | Industry stopped this route in the 1980s. Cheap fossil hydrogen made catalytic hydrogenation the standard route. | Cheap hydrogen |
| Glucose to sorbitol | Sorbitol, a sweetener and a precursor for vitamin C. | Industry stopped this route in the 1940s. | Catalysis |
| Glyoxylic acid | A precursor for paracetamol and glyphosate. | Clariant operated this route commercially until the 1990s. | Cost |
| Epoxidation of propylene | Propylene oxide, a precursor for polyurethane foam. | This route ran at pilot scale in the 1980s. Nobody took it to full commercial scale. | Stopped at pilot |
| Electrolytic hydrogen for ammonia, Norway | Ammonia for fertiliser. Water electrolysis, powered by hydroelectricity, made the hydrogen. | Norsk Hydro ran this route for most of the 20th century. The last plant closed in 1991, after North Sea gas arrived. | Natural gas |
Economics
Value has to beat cost
Good electrochemistry is not enough. The product must be worth more than the electricity, the hardware and the separation that make it. Six levers decide the result.
Cell voltage
The energy per tonne increases in direct proportion to the cell voltage. You pay for every 100 mV of overpotential or resistance loss on every tonne.
Current efficiency
This is the fraction of the charge that makes the product. Side reactions use electricity and add separation work.
Electricity price
Cheap, flexible power changes the result. A process that can change its load with the price of power has a different business case from a process that must run at full load all the time.
Current density
Current density sets the electrode area for each tonne. The electrode area sets much of the capital cost.
Lifetime
The life of the electrodes and membranes sets the replacement cost and the downtime.
Separation and co-products
A dilute product is expensive to recover. A valuable co-product can pay for much of the plant. Caustic soda does this for chlorine.
Tool
Electricity per tonne of product
kWh/t = n × F × V ÷ (3.6 × M × CE)
The example values are typical figures. They are not data for a specific plant. Use one currency for the two prices.
Electricity is only one part of the cost. Capital, membranes, separation and labour come on top.
Supply chain
The electron economy has its own supply chain
Electrochemical industry still uses materials and process chemicals that come from fossil sources. This dependency is smaller than the dependency it replaces. In principle, industry can remove it. But the dependency is there.
Sulphuric acid
Fertiliser production and metal leaching use large quantities of sulphuric acid. Today, much of this acid comes from sulphur that oil and gas plants remove from their products. If refining decarbonises, the acid supply can decrease. Electrochemical routes to the acid also exist.
Perfluorinated membranes
Chlor-alkali cells, PEM electrolysers, flow batteries and CO2 reduction reactors use Nafion-type membranes. Very few companies make these membranes, from fossil feedstocks and fluorspar.
Carbon felt
Carbon felt is the standard electrode in flow batteries. Its usual precursor is acrylonitrile. Acrylonitrile comes from propylene, and propylene comes from a refinery or a cracker.
Contact
Send a story or a question
Send a news story, a process for the back catalogue or a question about the economics. Tell me the source if you have one.
The form sends your message through Web3Forms. This site uses no cookies.